Wuhu Hengxin Cable Co., Ltd
Contact:Mr Dai
Phone: 13955309088
Address: 13955309088@163.com
Address: Jiuhua North Road Electrical Components Industrial Park, Wuhu City, Anhui Province
Problems encountered during the installation of electric heat tracing belts
随着对管道保温需求的不断增加,电加热带系统被应用于各种平台的管道保温中,尤其是电加热带被广泛使用,并逐渐得到用户的认可。然而,当越来越多的用户购买电加热带时,安装中存在错误。编辑提醒我,正确安装是关键。
电伴热带安装错误的问题很常见。由于安装不当和不加热导致的短路是常见的。我们如何避免电伴热带的错误安装?
1、安装加热带时,首先检查伴热带是否损坏。如果正常,接线将正常。
2、带状加热器接线时,芯线应单独连接。金属线是导电的。如果金属线继续连接在一起,就会出现短路故障。因此,接线时要小心,并经常打开和关闭带状加热器。频繁打开或关闭电伴热带将加速电伴热带的衰减。
3、铺设电加热带时,不要用强压力撞击。很容易损坏皮带中的材料布局,影响电加热皮带的使用寿命。
Prev: Insulation layer should also be installed on the electric heating belt
Next: Installation specifications for constant power electric heating belts
Related News
- What other areas can be used for electric heating in an underground garage?
- Introduction to the installation sequence of electric heating belt construction specifications
- Sharing safety experience on electric heating belt fire incidents
- Preparation work for installation of pipeline heat tracing belt
- Why do office buildings and other areas often use heating cables for heating?
- The development process of self limiting electric heat tracing and its comparison with traditional h
- Analysis of the causes of damage to the electric heating insulation system
- What is the difference between a constant power electric heating belt and a self limiting temperatur
- Which is a good electric heat tracing manufacturer
- Electric heat tracing manufacturers will introduce the working principle of electric heat tracing be