Wuhu Heng Xin Cable Co., Ltd.

+86 13955309088

13955309088@163.com

恒功率电热带
Industry News
Contact Us

Wuhu Hengxin Cable Co., Ltd 

Contact:Mr Dai

Phone: 13955309088

Address: 13955309088@163.com

Address: Jiuhua North Road Electrical Components Industrial Park, Wuhu City, Anhui Province

Industry News

What are the industrial properties of electric heat tracing belts

Edit:Wuhu Heng Xin Cable Co., Ltd. Date:2018-01-16

       Electric tropical beltIn the refining field of industrial silicon (also known as "metallic silicon"), the waste heat generated from flue gas is utilized to generate electricity. The use of electric heat tracing belts on generator sets is similar to that of other power plants, as they are used for heat compensation or antifreeze insulation. So in the design of electric heat tracing schemes,Model selection, construction operations, etc. can be implemented according to the electric tracing technology manual.

The energy consumption of industrial silicon refining is relatively high. In order to actively respond to the national call, strive to build a conservation oriented society, and protect our living environment. Actively explore energy-saving potential in refining production and utilize the waste heat of electric furnace flue gas for power generation. Not only can it save energy and reduce consumption for enterprises, but it also enables the rational utilization of resources and strengthens environmental protection.The production of industrial silicon generally adopts a semi enclosed refining furnace, which uses the waste heat generated by the flue gas of the electric furnace to generate electricity. During the operation of the power generation unit, rapid heat dissipation may occur, resulting in incomplete utilization of waste heat. In this case, we can use an electric heat tracing belt to compensate for its heat and maintain its operationThe heat generated during the process is not dissipated. Usually, generator sets require electric heat tracing in boiler feed water, return water, and steam pipelines to avoid freezing and rapid temperature dissipation during production. Due to the setting of the unit and the distance between pipelines, the length of using a single circuit is generally over 150 meters. So, it is recommended to use HengPower electric heating belt.

Several suggestions during use:

1. The heat generated by the steam pipeline itself is relatively high, so it is required that the electric heat tracing belt itself has high temperature resistance performance;

2. The main power supply uses a 35mm2 cable, and the branch uses a 4mm2 cable, depending on the design requirements;

3. Cables can be installed through exposed conduits to avoid exposure to harsh environments such as high temperatures and corrosion;

4. Post or hang warning labels for electric heat tracing to prevent situations such as non operation or electric shock.

The output power of a constant power heating belt is relatively stable and generally does not change due to external environmental factors. It does not have PTC performance that can control temperature on its own, and needs to be set, turned on or off through a thermostat or control system to achieve temperature control. However, the length of constant power usage should be greater than the self limiting temperatureTropical belt. So it is more suitable for use in industrial silicon waste heat power generation sites.

MI stainless steel armored heating system for industrial silicon industry. Industrial silicon is refined in a semi enclosed refining furnace, using the waste heat emitted during the production process to generate electricity. In the actual operation of the generator set, due to time constraints, heat is lost relatively quickly, which makes it difficult to fully utilize the waste heat and causes wavesFee. In response to this situation, an electric heat tracing insulation system can be used for heat compensation, and electric heat tracing can be installed on the relevant equipment of the generator set.

When using electric heat tracing belts, steam will be considered. Due to the high temperature of steam, it is necessary to find electric heat tracing belt products with high temperature resistance. Ordinary self limiting temperature and constant power electric heating strip cannot meet the temperature requirements, so our company recommends using high temperature resistant MI stainless steel armorElectric tropical beltAnd using MI stainless steelSteel armored electric heat tracing belts are usually not affected by external environmental factors due to their high heating temperature, high heat tracing temperature, and stable power. Not only suitable for pipeline insulation in ordinary areas, but also for pipeline insulation in explosive and corrosive areas.

Due to the lack of self temperature control performance during the installation of MI stainless steel armored electric heating strip insulation, an explosion-proof temperature controller is required to control the temperature. And during installation, it cannot be cut at will. It should be installed according to the standard. MI stainless steel armored electric tracing belt can withstand temperatures of over 500 degrees, so it is used in industrial siliconThe location for waste heat power generation is relatively suitable. The MI stainless steel armored electric heating strip used has the characteristics of high temperature resistance, waterproofing, explosion prevention, anti-aging, safety and reliability.

      Additionally, users are using MI stainless steel armorElectric tropical beltThe product can be customized according to specific needs, and the power, lengthSingle core or dual core, etc.