Wuhu Heng Xin Cable Co., Ltd.

+86 13955309088

13955309088@163.com

恒功率电热带
Industry News
Contact Us

Wuhu Hengxin Cable Co., Ltd 

Contact:Mr Dai

Phone: 13955309088

Address: 13955309088@163.com

Address: Jiuhua North Road Electrical Components Industrial Park, Wuhu City, Anhui Province

Industry News

Which model is better to choose for electric heat tracing

Edit:Wuhu Heng Xin Cable Co., Ltd. Date:2018-01-16

       Today, the editor would like to discuss with a wide range of electric heat tracing customers aboutElectric tropical beltRegarding selection related issues, let's take a look at the three aspects to pay attention to when choosing electric heat tracing products that have been compiled by a large number of customers. Next, let's learn about these three aspects!

1. When selecting models of electric heat tracing belts, if it is required to allow the use of self limiting electric heat tracing belts, they should be given priority consideration. Because the constant power electric heating belt cannot automatically control the temperature, there may be a phenomenon of excessive temperature, resulting in burn marks on the surface of the pipeline.

2. When there is a 20% difference between the surface temperature of the electric heat tracing belt and the temperature of the pipeline material, it is recommended not to choose an electric heat tracing belt with a metal shielding mesh. If the heat conduction is relatively fast, a sheathed one can be selected.

3. When considering what specifications of electric heat tracing tape to use, one should consider whether the pipeline material can withstand the high temperature of the electric heat tracing tape. This will avoid the possibility of the pipeline being burned.

 

The combination of electric heat tracing control box and pipeline heat tracing control monitoring system can achieve intelligent control with the current electric heat tracing system. We have achieved unmanned operation in terms of safety, energy efficiency, and reliability.

So how to install an electric heat tracing control box, there are the following points:

① Based on the location of the distribution room;

② Does not affect the installation of other electrical equipment;

③ The installed wall is a solid wall, and brackets should be added to ceramic or hollow brick walls;

④ The principle of high and low positions should be easy to observe and maintain.

Based on the above positioning principles and the layout of the electric heat tracing system pipeline, a two-wire electric heat tracing control alarm box was adopted. Place them separately in the distribution room or duty room, and supply power to the control box from the distribution box in the distribution room220V voltage. Each electric heat tracing control box is connected to multiple electric heat tracing belts, which are heated through fire water supply pipelines.

       Alright, the editor will talk about it todayElectric tropical beltThat's all for the content. See you next time.