Precautions for installation and use of self limiting heat tracing tape

1Self limiting tropical zoneAfter measuring the appropriate length for use, leave an extra 20 centimeters for wiring.

2. After cutting the blind end of the self limiting heat tracing strip, the matching protective shell should be installed, and it is important to note that the two wire cores cannot overlap. The blind end should be treated with sealant and insulating cloth.

3. Be sure to avoid using self limiting heat tracing strips with damaged surfaces, pay attention to waterproofing, and prevent any potential hazards.

4. Generally speaking, the length of a single self limiting temperature tracing tape with a rated voltage of 12V should be less than 30 meters, and in order to achieve insulation effect, the tracing tape should be tightly wrapped around the water pipe.